Duke Energy`s service area includes regions such as Florida, Indiana, Kentucky, North Carolina, Ohio and South Carolina. Net metering is available to all customers throughout the country. Any excess electricity generation at the end of the billing month will be credited to the customer`s energy consumption for the next billing cycle. At the end of each calendar year, Duke Energy will credit the customer with all unused net metering credits at an annual rate based on the COG-1 rate. Net metering limits are determined by individual states. As a result, Duke Energy`s net metering limit varies depending on the state in which it operates. After installation, a copy of the inspection form and certificate of completion must be sent to Duke Energy so that the customer can obtain permission to use the system once the meter is set. Duke Energy must have up to 1. October has received a complete connection request to ensure that the project is completed by December 31 of the current year. Duke Energy offers discounts for North Carolina customers who want to install a solar panel system. For homeowners, the program offers a $0.60/watt discount for systems up to 10 kilowatts. The benefit is equivalent to $3,600 for a 6 kilowatt (kW) system.
Non-residential customers also have access to discounts ranging from $0.50/watt to $0.75/watt. In some states, Duke Energy also offers programs that allow its customers to support renewables through other means: net metering credits are granted monthly at a rate of 10 to 11 cents/kWh. Unused credits are paid out each year in March – you can check current electricity prices in South Carolina on Duke Energy`s website. If a customer`s solar system generates more energy than Duke Energy provides, the customer will be credited with the excess kWh during the billing period of the following month. All accumulated credits are reset to zero on May 31 of each year and cannot be used to offset base fees for facilities or fees upon request. Customers are separately responsible for the monthly fee for the basic facilities. Interconnection is the process of physically connecting a generating station (renewable energy source) to Duke Energy`s power supply system. Any state in Duke Energy`s territory requires a request to establish a connection.
Registration fees and requirements vary from state to state. If a solar system generates more energy than is provided by Duke Energy, the customer will be credited with the excess kWh in the next billing period. These credits never expire, but if the customer stops net metering, all excess credits will be granted to Duke Energy. The customer is separately responsible for the payment of the monthly connection fee. Duke Energy`s net metering program allows customers who generate electricity from their own solar system to offset their energy costs. Net metering participants will receive a bill credit from Duke Energy for excess energy generated by their solar panel system. Once the system is installed and inspected, the customer must submit a certificate of completion form, for which Duke Energy will give the customer permission to operate based on the Duke meter being set. Duke Energy Net Metering`s prices and prices vary from state to state. Duke Energy has three levels of generation facilities for net metering contracts.
Projects based on level 1 inverters up to 25 kW. Levels 2 and 3 are inverter-free projects of more than 25 kW. Most residential customers have Level 1 systems. Net metering credits are determined at Rider RE, Retail Energy Tariff, which covers costs related to energy supply. Duke Energy Kentucky has two tiers for net metering systems: For connecting customers with Tier 1 solar panel systems (with a power of 10 kW or less), there are no registration fees, no circuit breaker, or insurance requirements associated with that system size. Duke Energy will replace the customer`s electricity meter with a two-way meter capable of recording excess electricity generation for the purpose of calculating net metering credits. Level 2 and Level 3 production facilities have application fees of $240 and $750, respectively, and require insurance of $1 million and $2 million, respectively. In South Carolina, excess energy credits that were not used to offset electricity demand in the current month can be carried forward to the next billing month. All remaining credits during the March billing period will be paid to the customer, after which the net metering credits will be reset to zero.
Duke Energy has three levels of generation facilities for net metering contracts: Your Duke Energy excess net metering billing credits are treated differently depending on where you live. If a customer`s solar system generates more energy than it consumes in a month, the customer will receive net metering credits that accumulate over a 12-month period. Customers can request a written refund from the utility, which will be assessed at the Rider RE rate. After installing the solar panel system, an inspection may be required. Upon completion of the inspection, the customer will receive a confirmation letter from Duke Energy stating that the solar panel system is complete. The State of North Carolina also requires customers to submit a report on the proposed construction to the North Carolina Utilities Commission and provide Duke Energy with the file number of the report. Once these documents are submitted, Duke Energy grants permission to install the solar panel system, at what time a circuit breaker will be installed. The assembly process varies depending on the size of the project. Most retail customers have a system that is 20 kW in size or smaller, in which case customers must first submit a pre-application application with a non-refundable fee of $300.
The customer must then complete the online interconnection application signed by the customer requesting the interconnection, as well as a $100 non-refundable processing fee that includes an electrical initiation plan and a certificate of insurance for residential customers, the interconnection process applies to projects less than or equal to 20 kW. Clients must first submit a pre-application with a non-refundable fee of $500. The customer will then be required to complete the online interconnection application, including a single-line electrical diagram and insurance certificate, as well as a $100 non-refundable processing fee. Duke Energy then issues a conditional permit to install the solar panel system with the required circuit breaker. EnergySage allows you to compare your solar options when you get quotes from the best local solar installers in your area. Most residential customers have solar systems of less than 25 kW and fall under the Level 1 interconnection process. Initially, a client must submit a pre-application report request with a non-refundable fee of $300. The customer must then complete Duke Energy Ohio`s short form for interconnection application and pay a $50 application fee.
The application must also include a single-line electrical diagram, insurance certification and equipment certification. Duke Energy also requires the installation of a circuit breaker. You wouldn`t buy a car without first comparing a few options. Shouldn`t solar be the same thing?. There is no registration fee for interconnection for customers with Level 1 solar module systems (up to a size of 10 kW). Level 2 and Level 3 applications incur registration fees of $50 and $100, respectively, plus $1/kW and $2/kW. Most solar panels for private households are level 1. In addition to the Level 1 application, customers should also include an electrical initiation plan, equipment specifications, and a circuit breaker.